JRL Ghost Collection #2 – Professional Clipper & Shaver Set

The clipper: JRL Ghost 2020C
A dual-speed clipper running at 6,000 and 7,500 RPM on a constant high-torque motor, with up to 5 hours of cordless work. The Onyx Fade blade carries Cool Blade technology, can be zero-gapped, and is interchangeable with most professional brands. Five locking positions plus infinite micro-adjustment cover the taper range, and an LED screen shows the remaining battery in minutes. Charging takes 3 hours, or 5 hours for the Reset IQ conditioning charge.

The trimmer: JRL Ghost 2020T
Built for outlines, edge-ups and beard work. The Onyx EZ-GAP blade zero-gaps without tools, and the 360-degree exposed blade leaves the cutting edge fully visible while you line. It runs at 8,200 RPM with up to 3.5 hours cordless.

The shaver: JRL Ghost Foil Shaver SH2301
A magnetic levitation motor holds the blades suspended and contact-free at 8,000 RPM. A single ultra-thin foil flexes to follow contours, with a floating cutter behind it, and the tool stays cool to the touch even after extended use. Up to 3 hours cordless, and per JRL it can also be used plugged in. Intended for bald fades, necklines and facial shaving.

Smart-Clip on the clipper and the trimmer
Both the 2020C and the 2020T carry Smart-Clip, which senses blade resistance and raises motor speed so the tool does not drag or stall.

One honest note on the finish
JRL states that the matte finish may make the screen appear less clear in certain lighting. It has no effect on performance.

Accessories, as JRL lists them tool by tool
What follows is the accessory list JRL publishes on each tool's own product page. It is not a statement about what is inside this set's box.
• 2020C clipper: dock, 10 guard combs (#0.5 through #8), blade protector, cleaning brush, oil, screwdriver.
• 2020T trimmer: pre-installed blade, dock, blade protector, cleaning brush, oil. JRL lists no guard combs on the standalone 2020T page.
• SH2301 foil shaver: charging cable, protective foil cap, cleaning brush, oil.

About the name this set is sold under
This set is sold in our market as Ghost Collection #2. JRL does not publish any product under that name, and it does not document the contents of this bundle anywhere. JRL's own figures do not agree with each other either: the standalone 2020C page lists 10 guard combs, while JRL's Ghost Collection #1 page lists 6 per tool. Rather than pick one and present it as fact, we are telling you plainly that the data does not exist. What is verifiable is the three tools themselves, each a JRL catalogue item with its own published spec.

JRL Ghost 2020C clipper
• Speeds: 6,000 and 7,500 RPM.
• Motor: constant high-torque.
• Cordless runtime: up to 5 hours.
• Charging: 3 hours standard, 5 hours for the Reset IQ conditioning charge.
• Blade: Onyx Fade, zero-gap capable, Cool Blade technology, interchangeable with most professional brands.
• Lever: 5 locking positions plus infinite micro-adjustment.
• Display: LED screen showing remaining battery in minutes.
• Smart-Clip: yes.

JRL Ghost 2020T trimmer
• Speed: 8,200 RPM.
• Cordless runtime: up to 3.5 hours.
• Blade: Onyx EZ-GAP, tool-free zero-gapping, 360-degree exposed blade for full cutting visibility.
• Smart-Clip: yes.

JRL Ghost Foil Shaver SH2301
• Motor: magnetic levitation, blades suspended and contact-free.
• Speed: 8,000 RPM.
• Cordless runtime: up to 3 hours, and per JRL also usable plugged in.
• Foil: single ultra-thin foil that flexes to follow contours, with a floating cutter behind it.
• Heat: stays cool to the touch even after extended use.

Finish
All three tools are in Ghost White. JRL notes the matte finish may make the screen appear less clear in certain lighting, with no effect on performance.

What JRL does not publish
Anything missing from the lists above is missing because JRL does not state it. We are not filling those gaps with a guess.
• Weight and dimensions: not published for any of the three tools.
• Wattage or power draw: not published.
• Noise level: no decibel figure. JRL describes noise in words only.
• Charging time for the 2020T and the SH2301: not published. Only the 2020C has a published charge time.
• Guard comb sizes in millimetres: not published. JRL designates its combs #0.5 through #8 and gives no millimetre range.
• Contents of this set: JRL publishes no contents list for the bundle as a bundle.

This set fits you if
• You cut for a living. One matched kit covers cutting, lining and a bald finish, instead of three tools from three different brands.
• You zero-gap. The 2020C's Onyx Fade blade is zero-gap capable, and the 2020T's Onyx EZ-GAP zero-gaps without tools at all.
• You work long days. Up to 5 hours cordless on the clipper, 3.5 on the trimmer, 3 on the shaver, and the clipper's LED screen reports the battery left in minutes rather than leaving you to guess.
• You do bald fades and necklines. That is what the SH2301 is built for: suspended contact-free blades and a single flexing foil that follows the contour.
• You already have blades you trust. The 2020C blade is interchangeable with most professional brands.

Think again if
• You need the box contents confirmed before you buy. JRL publishes no contents list for this set, and we will not invent one.
• You are counting on guard combs with the trimmer. JRL lists none on the standalone 2020T page.
• You choose tools by weight, dimensions or a noise rating. JRL publishes none of those numbers.
• You want a screen that reads sharply in any light. JRL itself notes the matte finish can make it look less clear in certain lighting.
• You only need one of the three. Buying that single tool on its own makes more sense than a set you use a third of.

What exactly is in the box?
We are not going to tell you, because JRL does not publish it. There is no contents list for this set on JRL's side, and JRL's own numbers conflict: the standalone 2020C page lists 10 guard combs, while JRL's Ghost Collection #1 page lists 6 per tool. What we can show you is the accessory list JRL publishes for each tool separately, and that is exactly what appears in the Product Details tab, labelled as such.

Is Ghost Collection #2 an official JRL product line?
No. JRL publishes no product under that name. It is the name this bundle is sold under in our market. The three tools inside it are each genuine JRL catalogue items with their own published specs: the Ghost 2020C clipper, the Ghost 2020T trimmer and the Ghost Foil Shaver SH2301.

How long does each tool run, and how long does it take to charge?
Cordless runtime is up to 5 hours on the 2020C, up to 3.5 hours on the 2020T and up to 3 hours on the SH2301, which per JRL can also be used plugged in. Charging is published for the clipper only: 3 hours standard, or 5 hours for the Reset IQ conditioning charge. JRL publishes no charging time for the trimmer or the shaver, so neither do we.

Can both blades be zero-gapped, and what does Smart-Clip do?
Yes to both tools. The 2020C's Onyx Fade blade is zero-gap capable, and the 2020T's Onyx EZ-GAP zero-gaps with no tools, its 360-degree exposed blade keeping the cutting edge in view while you work. Smart-Clip, fitted to the clipper and the trimmer, senses blade resistance and raises motor speed so the tool does not drag or stall.

Shipping
Home delivery, up to 7 business days from the order date.

Returns
Unopened products in their original packaging may be returned within 14 days of receiving the order, in line with the site's terms. Returns are handled at SKRILOV Hair Design & Care, 33 Gilad Street, Nof HaGalil 1786033.